Stereo Phone Jack Connector DC Jack DIP/SMT
Applications:Include low power on/off designs, instrumentation, telecommunications, performance audio, computers/servers, networking and more.1) Computer products2) Consumer products3) Communication machines4) Instrumentation
Specification:1. Contact Resistance: ≤ 100mΩ2. Insulation Resistance: ≥ 100mΩ3. Withstand Voltage: AC500V(50-60Hz) 1 min4. Mechanical life: 5000 cycles5. Operating Temperature Range: -25ºC-85ºC6. Ambient Humidity Used: ≤ 85% RH7. Solder Ability: 245± 5ºC, 5± 1S8. Withstand Soldering Temperature: 260± 5ºC, 5± 1S
Welding Conditions:1.Hand solderingUse a soldering iron of 30 watts, controlled at 350ºC approximately 3 seconds while solder applying2.Wave soldering/Reflow SolderingThe peak temperature of the wave oven should be set to 260ºC max. Condition for soldering Temperature Profile
Material:1. Base: PBT2. Cover: PBT3. Insulation: POM4. Terminal: Phosphor bronze Ag plated5. Shell: Stainless steel Natural6. Ring: Brass Ni plated
Features:1. With AC97 and DHA etc. Different design configuration;2. Terminal is made from eximious bronze material to assure long life;3. Assembly ways: DIP and SMT4. Flexibility design for terminal interface to ensure nice contact and prolong the operating life5. Can design different connect products
General characteristic：After exposed at temperature of 40 ±2℃, insulation resistance shall not be <30MΩAt relative humidity of 90% to 95% for 48 hours, insulation resistance shall not be <30MΩDried at room temperature for 30 minutes, insulation resistance shall not be <30MΩConnector shall withstand 5,000 cycles of insertions and withdrawal with testing plug contact resistance shall not exceed 0.1ΩA wide range of A/V connectors are available
For more detais welcome to contact us!